M5 3D Printer

Prints fine but is a lot louder than the m5c.

Right out the box this printer has been awesome, the speed and quality look amazing, I bought it to print recycled soda bottle filament that I am making and have just ordered the all metal hot end to increase temp at the nozzle. One slight criticism would be the camera would be better higher. I will try the smaller nozzle for a greater detailed print but thats for the future. Attached is a print using green coloured soda bottle pet.

M5 3D Printer

With how much you pay for other printers like the Ender or Prusa, the AnkerMake is definitely giving you what you paid. The printer is great! The quality for how fast it prints is impressive.

Customer service is what really drove me to write this review though.
The printer stopped extruding for me after a couple weeks and Jack, from customer service, worked with me through every step (very patiently) to help me resolve the issue. They covered the cost of all replacement parts and shipping. Some of the best customer service I have ever encountered.

I expected some errors with a printer new on the market but they made dealing with it as easy as it could be. All you need is a little patience.

Made the mistake of getting an Ender 3 max neo for my first printer. Had to do a ton of upgrades right out of the box. It was slow and big prints had 2 day print times and usually failed on the last few layers.

This is NOT that. Out of the box I popped a few screws in and was printing within an hour. It’s 10x as fast as I could print on the Ender. With better quality. No hassle. WiFi is great and being able to check the print from an app is so much better than nervously checking a print every 15 minutes. Again. Amazing.

I have no complaints. This thing looks great. You could keep it in your kitchen. It’s solidly and well built. If you need to upgrade the hotend it’s a 5 minute process vs a Saturday project with Ender. People mentioning the noise.. to me the perfect prints in 10% of the time is worth hearing a fan. I’ve been testing mine in the living room while watching tv. If you run other normal household appliances, that’s the comparison I’d make.

So worth it. Spent about the same on this as I did the Ender with upgrades. This thing is great. No hassle or stress.

Prints fine but is a lot louder than the m5c.

Right out the box this printer has been awesome, the speed and quality look amazing, I bought it to print recycled soda bottle filament that I am making and have just ordered the all metal hot end to increase temp at the nozzle. One slight criticism would be the camera would be better higher. I will try the smaller nozzle for a greater detailed print but thats for the future. Attached is a print using green coloured soda bottle pet.

M5 3D Printer

With how much you pay for other printers like the Ender or Prusa, the AnkerMake is definitely giving you what you paid. The printer is great! The quality for how fast it prints is impressive.

Customer service is what really drove me to write this review though.
The printer stopped extruding for me after a couple weeks and Jack, from customer service, worked with me through every step (very patiently) to help me resolve the issue. They covered the cost of all replacement parts and shipping. Some of the best customer service I have ever encountered.

I expected some errors with a printer new on the market but they made dealing with it as easy as it could be. All you need is a little patience.

Made the mistake of getting an Ender 3 max neo for my first printer. Had to do a ton of upgrades right out of the box. It was slow and big prints had 2 day print times and usually failed on the last few layers.

This is NOT that. Out of the box I popped a few screws in and was printing within an hour. It’s 10x as fast as I could print on the Ender. With better quality. No hassle. WiFi is great and being able to check the print from an app is so much better than nervously checking a print every 15 minutes. Again. Amazing.

I have no complaints. This thing looks great. You could keep it in your kitchen. It’s solidly and well built. If you need to upgrade the hotend it’s a 5 minute process vs a Saturday project with Ender. People mentioning the noise.. to me the perfect prints in 10% of the time is worth hearing a fan. I’ve been testing mine in the living room while watching tv. If you run other normal household appliances, that’s the comparison I’d make.

So worth it. Spent about the same on this as I did the Ender with upgrades. This thing is great. No hassle or stress.

Prints fine but is a lot louder than the m5c.

Right out the box this printer has been awesome, the speed and quality look amazing, I bought it to print recycled soda bottle filament that I am making and have just ordered the all metal hot end to increase temp at the nozzle. One slight criticism would be the camera would be better higher. I will try the smaller nozzle for a greater detailed print but thats for the future. Attached is a print using green coloured soda bottle pet.

M5 3D Printer

With how much you pay for other printers like the Ender or Prusa, the AnkerMake is definitely giving you what you paid. The printer is great! The quality for how fast it prints is impressive.

Customer service is what really drove me to write this review though.
The printer stopped extruding for me after a couple weeks and Jack, from customer service, worked with me through every step (very patiently) to help me resolve the issue. They covered the cost of all replacement parts and shipping. Some of the best customer service I have ever encountered.

I expected some errors with a printer new on the market but they made dealing with it as easy as it could be. All you need is a little patience.

Made the mistake of getting an Ender 3 max neo for my first printer. Had to do a ton of upgrades right out of the box. It was slow and big prints had 2 day print times and usually failed on the last few layers.

This is NOT that. Out of the box I popped a few screws in and was printing within an hour. It’s 10x as fast as I could print on the Ender. With better quality. No hassle. WiFi is great and being able to check the print from an app is so much better than nervously checking a print every 15 minutes. Again. Amazing.

I have no complaints. This thing looks great. You could keep it in your kitchen. It’s solidly and well built. If you need to upgrade the hotend it’s a 5 minute process vs a Saturday project with Ender. People mentioning the noise.. to me the perfect prints in 10% of the time is worth hearing a fan. I’ve been testing mine in the living room while watching tv. If you run other normal household appliances, that’s the comparison I’d make.

So worth it. Spent about the same on this as I did the Ender with upgrades. This thing is great. No hassle or stress.

Prints fine but is a lot louder than the m5c.

Right out the box this printer has been awesome, the speed and quality look amazing, I bought it to print recycled soda bottle filament that I am making and have just ordered the all metal hot end to increase temp at the nozzle. One slight criticism would be the camera would be better higher. I will try the smaller nozzle for a greater detailed print but thats for the future. Attached is a print using green coloured soda bottle pet.

M5 3D Printer

With how much you pay for other printers like the Ender or Prusa, the AnkerMake is definitely giving you what you paid. The printer is great! The quality for how fast it prints is impressive.

Customer service is what really drove me to write this review though.
The printer stopped extruding for me after a couple weeks and Jack, from customer service, worked with me through every step (very patiently) to help me resolve the issue. They covered the cost of all replacement parts and shipping. Some of the best customer service I have ever encountered.

I expected some errors with a printer new on the market but they made dealing with it as easy as it could be. All you need is a little patience.

Made the mistake of getting an Ender 3 max neo for my first printer. Had to do a ton of upgrades right out of the box. It was slow and big prints had 2 day print times and usually failed on the last few layers.

This is NOT that. Out of the box I popped a few screws in and was printing within an hour. It’s 10x as fast as I could print on the Ender. With better quality. No hassle. WiFi is great and being able to check the print from an app is so much better than nervously checking a print every 15 minutes. Again. Amazing.

I have no complaints. This thing looks great. You could keep it in your kitchen. It’s solidly and well built. If you need to upgrade the hotend it’s a 5 minute process vs a Saturday project with Ender. People mentioning the noise.. to me the perfect prints in 10% of the time is worth hearing a fan. I’ve been testing mine in the living room while watching tv. If you run other normal household appliances, that’s the comparison I’d make.

So worth it. Spent about the same on this as I did the Ender with upgrades. This thing is great. No hassle or stress.

Prints fine but is a lot louder than the m5c.

Right out the box this printer has been awesome, the speed and quality look amazing, I bought it to print recycled soda bottle filament that I am making and have just ordered the all metal hot end to increase temp at the nozzle. One slight criticism would be the camera would be better higher. I will try the smaller nozzle for a greater detailed print but thats for the future. Attached is a print using green coloured soda bottle pet.

M5 3D Printer

With how much you pay for other printers like the Ender or Prusa, the AnkerMake is definitely giving you what you paid. The printer is great! The quality for how fast it prints is impressive.

Customer service is what really drove me to write this review though.
The printer stopped extruding for me after a couple weeks and Jack, from customer service, worked with me through every step (very patiently) to help me resolve the issue. They covered the cost of all replacement parts and shipping. Some of the best customer service I have ever encountered.

I expected some errors with a printer new on the market but they made dealing with it as easy as it could be. All you need is a little patience.

Made the mistake of getting an Ender 3 max neo for my first printer. Had to do a ton of upgrades right out of the box. It was slow and big prints had 2 day print times and usually failed on the last few layers.

This is NOT that. Out of the box I popped a few screws in and was printing within an hour. It’s 10x as fast as I could print on the Ender. With better quality. No hassle. WiFi is great and being able to check the print from an app is so much better than nervously checking a print every 15 minutes. Again. Amazing.

I have no complaints. This thing looks great. You could keep it in your kitchen. It’s solidly and well built. If you need to upgrade the hotend it’s a 5 minute process vs a Saturday project with Ender. People mentioning the noise.. to me the perfect prints in 10% of the time is worth hearing a fan. I’ve been testing mine in the living room while watching tv. If you run other normal household appliances, that’s the comparison I’d make.

So worth it. Spent about the same on this as I did the Ender with upgrades. This thing is great. No hassle or stress.

Prints fine but is a lot louder than the m5c.

Right out the box this printer has been awesome, the speed and quality look amazing, I bought it to print recycled soda bottle filament that I am making and have just ordered the all metal hot end to increase temp at the nozzle. One slight criticism would be the camera would be better higher. I will try the smaller nozzle for a greater detailed print but thats for the future. Attached is a print using green coloured soda bottle pet.

M5 3D Printer

With how much you pay for other printers like the Ender or Prusa, the AnkerMake is definitely giving you what you paid. The printer is great! The quality for how fast it prints is impressive.

Customer service is what really drove me to write this review though.
The printer stopped extruding for me after a couple weeks and Jack, from customer service, worked with me through every step (very patiently) to help me resolve the issue. They covered the cost of all replacement parts and shipping. Some of the best customer service I have ever encountered.

I expected some errors with a printer new on the market but they made dealing with it as easy as it could be. All you need is a little patience.

Made the mistake of getting an Ender 3 max neo for my first printer. Had to do a ton of upgrades right out of the box. It was slow and big prints had 2 day print times and usually failed on the last few layers.

This is NOT that. Out of the box I popped a few screws in and was printing within an hour. It’s 10x as fast as I could print on the Ender. With better quality. No hassle. WiFi is great and being able to check the print from an app is so much better than nervously checking a print every 15 minutes. Again. Amazing.

I have no complaints. This thing looks great. You could keep it in your kitchen. It’s solidly and well built. If you need to upgrade the hotend it’s a 5 minute process vs a Saturday project with Ender. People mentioning the noise.. to me the perfect prints in 10% of the time is worth hearing a fan. I’ve been testing mine in the living room while watching tv. If you run other normal household appliances, that’s the comparison I’d make.

So worth it. Spent about the same on this as I did the Ender with upgrades. This thing is great. No hassle or stress.